Water Level Switch WPS 5000
Product number:
1114500
Product highlights
Freely selectable switching point
Special features: The measuring electrodes are chlorine and salt water resistant (Stainless steel AISI 316 / V4A)
Robust sensor for permanently usage under water
Simple and quick installation
Product information "Water Level Switch WPS 5000"
The electronic water level switch WPS 5000 is suitable for automatic
level monitoring of conductive liquids in tanks, wells, water tanks or
similar (such. as rainwater, tap, fresh water, waste, heating and
cooling water at backflow of water, for example, by clogged drains,
flooding in through cable break, etc.).
For storage of concrete, plastic or metal. The device can be configured
as either refill or bank discharge. Here, the liquid level automatically
between two water level (min. And max) is maintained. When defined
ingress of water or when reaching the previously level object speaks the
relay of the WPS 5000 (optionally with digital delay setting) and
switches on the built-in socket a connected 230 V consumers.
Your benefits:
– On / Off Switch-off delay adjustable: 1 … 9,999 seconds (approximately 2.8 hrs.).
– Freely selectable switching point
– Relay NO or NC configurable
– Remote measuring up to 30m possible via a 2-core cable with sensor (Ø 20 mm x length 95 mm) which is included
– Input for water sensor or float switch (parallel connection possible)
– No mains voltage at the sensor
– Simple and quick installation
– Operating and unattended operation
Login
Technical Data
– Dim. (L x W x H): 160 x 80 x 60 mm