Universal temperature switch UTS 125
Product number:
1114680
Product highlights
Remote measurement up to 50 m
Operating voltage: 230 VAC / 50 – 60 Hz
Sensor monitoring for interruption
Storage of the programmed switching thresholds even in the event of a power failure
Product information "Universal temperature switch UTS 125"
Function:
The UTS 125 thermal switch records the current ambient temperature and automatically switches the connected device on and off when the temperature reaches certain values. Drops e.g. the room temperature to below 20 ° C, a fan heater is automatically activated and heats up to the set temperature. Then the device switches itself off. Basically, the thermal switch UTS 125 can be used wherever you want to keep control over the room temperature: whether in the greenhouse for the wintering of plants, in the hobby room in the basement without its own heating, for electric outdoor saunas, in the turtle terrarium, … The UTS125 is suitable for all areas of application where temperature control in heating or cooling mode is required, such as central heating, air conditioning, incubator, etc. The device can be used independently, e.g. B. serve as a frost guard, but also as a replacement for defective mechanical thermostats or digital thermometers, etc.
The power of the connected device may not exceed 2300 VA.
Login
Technical Data
– Operating voltage: 230 VAC / 50 – 60 Hz
– Output voltage: 230 V / 50 Hz / 10 A (for 230 volt socket)
– Power consumption: approx.0.3 VA (stand-by)
– Maximum connection load: 230 VAC / 2300 VA / 10 A.
– Sensor measuring range: –55 to 127.0 ° C
– Accuracy in the range (–55 ° C …– 10 ° C: / –2 ° C
– in the range –10 ° C … 85 ° C: / –0.5 ° C
– in the range 85 ° C … 127 ° C: / –2 ° C
– Resolution: 0.1 ° C
– Degree of protection: IP 20
– Device ambient temperature: –10 to 40 ° C
– Silicone cable temperature range: –55 to 200 ° C
– Dimensions without plug (W x H x D): 60 x 98 x 40 mm
– Potted temperature sensor in waterproof housing (dimensions: 30 x 9 mm)
– Display rotates by 180 ° using buttons
– Temperature sensor type: Maxim DS18B20 (with 2.0 m cable included)
– Min./Max. display
– Switching temperature from –55… 127 ° C freely adjustable in 0.1 ° C steps
– Hysteresis (switching accuracy) freely adjustable (0.1 ° C … 10 ° C)
– Remote measurement up to 50 m
– Sensor monitoring for short circuits
– Sensor monitoring for interruption
– Output switches off in the event of a sensor error
– Operation and monitoring-free operation
– Can be set for heating or cooling
– LC display for temperature setting, relay (socket) on, sensor error, heating, cooling
– Storage of the programmed switching thresholds even in the event of a power failure
– Automatic restart after a power failure
– Output voltage: 230 V / 50 Hz / 10 A (for 230 volt socket)
– Power consumption: approx.0.3 VA (stand-by)
– Maximum connection load: 230 VAC / 2300 VA / 10 A.
– Sensor measuring range: –55 to 127.0 ° C
– Accuracy in the range (–55 ° C …– 10 ° C: / –2 ° C
– in the range –10 ° C … 85 ° C: / –0.5 ° C
– in the range 85 ° C … 127 ° C: / –2 ° C
– Resolution: 0.1 ° C
– Degree of protection: IP 20
– Device ambient temperature: –10 to 40 ° C
– Silicone cable temperature range: –55 to 200 ° C
– Dimensions without plug (W x H x D): 60 x 98 x 40 mm
– Potted temperature sensor in waterproof housing (dimensions: 30 x 9 mm)
– Display rotates by 180 ° using buttons
– Temperature sensor type: Maxim DS18B20 (with 2.0 m cable included)
– Min./Max. display
– Switching temperature from –55… 127 ° C freely adjustable in 0.1 ° C steps
– Hysteresis (switching accuracy) freely adjustable (0.1 ° C … 10 ° C)
– Remote measurement up to 50 m
– Sensor monitoring for short circuits
– Sensor monitoring for interruption
– Output switches off in the event of a sensor error
– Operation and monitoring-free operation
– Can be set for heating or cooling
– LC display for temperature setting, relay (socket) on, sensor error, heating, cooling
– Storage of the programmed switching thresholds even in the event of a power failure
– Automatic restart after a power failure